Sandblasting Cabinet Blasting Pot And Sandblaster Parts
  • Sandblasting abrasive Plastic abrasive plastic media, resin media

    Sandblasting abrasive Plastic abrasive plastic media, resin media

    Advantage:

    1. not hurting work piece surface, and not affect the precision of the size, keep the plating layer.
    2. no-toxic
    3. good corrosion protection,
    4. more hydrophobicity,
    5. good adhesion and
    6. high electrical resistance compared to other systems.
  • Brown fused alumina /Brown Aluminum Oxide 16mesh 24mesh 46mesh 60mesh 80mesh 120mesh 150mesh

    Brown fused alumina /Brown Aluminum Oxide 16mesh 24mesh 46mesh 60mesh 80mesh 120mesh 150mesh

    2. Applications:

    ♦Brown fused alumina is high temperature, corrosion resistance, high strength properties, it poured with steel sliding gate, smelting rare metals, special alloys,

    ceramics, iron-smelting furnace of the lining (walls and tubes); physical and chemical containers, spark plugs, heat-resistant anti-oxidation coating.

    ♦Brown Corundum heat preservation material, such as lightweight corundum brick, corundum hollow ball and fiber products,

    widely used in a variety of high-temperature kiln furnace walls and roof, both high temperature-resistance and heat-preservation.

    ♦Mainly used for abrasion and high temperature resistant, inoxidizable aggregate and filling of shaped and monolithic refractory in steel metallurgy,

    various industrial stoves, electric furnace etc.

  • Red water jet cutting garnet sandblasting abrasive garnet sand 20 40 60 80 mesh grit media

    Red water jet cutting garnet sandblasting abrasive garnet sand 20 40 60 80 mesh grit media

    Application:

    Garnet sand for sandblasting

    Garnet sand for waterjet cutting

    Garnet sand for Water filtration

    Garnet sand forWear-resistant floor sand

  • Glass beads abrasive

    Glass beads abrasive

    1.Roundness: 85% min

    2.Cleanliness: Cleanliness:Clean and transparent, no obvious impurities, no black spots.

    3.Delivery: <50tons , needs about 7 days to the loading port.

  • Plastic Mass Finishing Deburring Polishing Media

    Plastic Mass Finishing Deburring Polishing Media

    You can also use it for secondary surface smoothing of hard metal parts once they have undergone ceramic media deburring.
    Recently, however, the use of plastic tumbling media has become more common in finishing die casting parts and machined parts,

    owing to its non-chipping and non-cracking feature.
    Plus.compared to ceramic media, it offers better surface refinement and inflicts less damage on the metal surface. Thus,

    you can get metal surfaces ready for electroplating, anodizing, and even painting. The most common shape is cone shape,

    pyramid shape, triangle shape. Plastic Tumbling Media Feature:

    * Surface Finish Smoothing
    * Excellent for Soft Metals
    * Medium Density Tumbling Media
    * Light Cutting
    * Wide Selection of Shapes and Sizes
    * Short Cycle Times

  • Abrasive Garnet for Blasting Water Jet Cutting Sandblast Media 20/40mesh 30/60mesh 80mesh

    Abrasive Garnet for Blasting Water Jet Cutting Sandblast Media 20/40mesh 30/60mesh 80mesh

    Ganet Abrasive Main applications
    (1)Blast cleaning of steel structure, hull and bridge
    (2)Waterjet cutting of metal, stone and glass
    (3)Filter medium of chemical industry. petroleum, pharmacy and water treatment
    (4)Grinding of marble.optical lens. glassware. leather and other materials
    (5)Raw material of grinding wheel.oil stone. emery cloth and abrasive paper
    (6)Wear-resistant material of expressway pavement. runway. wear-resistant rubber and anti-skid paint.

  • Stainless steel shot

    Stainless steel shot

    Application:stainlesssteelshotremovingrust:Shotblastingrust-removal,shotpeeningrust-removalcastingpartsrust-removal,forgedpartsandsteelplaterust-removal,H-beamsteelrust-removal,steelstructurerust-removal.stainlesssteelshotintensifying:Shotblastingintensifyingofstainlesssteelpartsandheattreatmentparts.stainlesssteelshotshotpeening:ShotpeeningofColouredaluminum,copper,magnesiumdie-castingandstainlesssteel.ApplicationDevicesStainlesssteelshotiskindofabrasiveusedforshotblastingmachine,shotblastin...
  • High frequency porcelain finishing media

    High frequency porcelain finishing media

    High frequency porcelain finishing media mainly be used .
    1Derusting    2.Deburring   3. Radiusing  4.Surface smoothing
    5.Degreasing,Cleaning before plating or chemistry    6.Finishing and polishing for instrument

    Different size as following :

  • Brown oxide polishing media

    Brown oxide polishing media

    Brown oxide polishing media mainly be used for mass finishing process. Deburring, Grinding, Polishing and Fine Polishing
    is suitable for rought polishing

    There are many different size ,shape and color as following

  • Silicon carbide abrasive

    Silicon carbide abrasive

    Emery scientific name of silicon carbide of SiC.Silicon carbide hardness only to diamond, boron carbide and cubic boron nitride, ranked fourth in the inorganic material.Through hot pressing sintering method, a high density of silicon carbide.It has high strength and good oxidation resistance, high temperature deformation, can be used as high temperature gas turbine on the turbine blades, but also for the wear of the sealing material, but also for the nozzle of the rocket nozzle and lightand b...
  • Plastic abrasive

    Plastic abrasive

    Plastic abrasiveApplications:Plasticabrasivescanremovethemetal surfacepaintlayer,removetheplastic partsand plasticflash,engines,wheels, landing gear, the wholeprocessofaircraft maintenancetogopaintcleanstrengthen.Can makethe surfacecleanlinessand roughnessto eliminate stress,increasethestrengthofthe workpiece surfaceto improve thefatigue resistanceofthe workpieceto increase thecoatingadhesion,andtoextendthecoatingdurability,leveling anddecorationoftheworkpieceand coating.Plasticabrasiveblast ...
  • Cast steel grit

    Cast steel grit

    Application:Blastcleaningofcaststeelgrit:Usedforblastcleaningofcasting,die-casting,forging,sandremovalofcasting,steelplate,Htypesteel,steelstructure.Rustremovalofcaststeelgrit:Rustremovalofcasting,forging,steelplate,Htypesteel,steelstructure,descalingofforging.Shotpeeningofcaststeelgrit:Shotpeeningofgear,heattreatment.Shotblastingofcaststeelgrit:Shotblastingofprofilesteel,shipboard,steelboard,steelmaterial.Shotblastingofcaststeelgrit:Shotblastingofsteelboard,profilesteel,steelstructure.Pre-tr...
12 Next > >> Page 1 / 2