Description of equipment and system functions:
The equipment is composed of sandblasting main engine, trolley support, movable trolley, automatic turntable, separator, dust collector box, electric control box, electric control system and so on.
1) the sandblasting chamber of the main engine is welded by 4mm hot-rolled steel plate, the outer surface is sprayed with high-temperature plastic powder and the inner surface is protected by wear-resisting polyamine resin rubber. After the work-piece is sandblasted in the sandblasting chamber, the blowing gun will clean up the sand on the surface, and then exit the sandblasting chamber.
2) size of mainframe: 4200(L) X2400(W) x2600(h) mm;
3) the machine is equipped with 2 high pressure spray guns, the nozzle is made of boron carbide material, the aluminum gun body and the diameter of the spray nozzle is φ8mm.
The left side of the main engine is equipped with trolley support. The trolley support is made of section steel welded and covered with light rail. The load is less than 1-5 tons.
The mobile trolley is welded by section steel. The mobile trolley is made up of section steel, bearing and driving motor. Driving Motor Power: 0.75kw.
The turntable is composed of steel bar, flat plate, bearing, v-belt, pulley and driving motor. The turntable can rotate automatically. The diameter of the turntable is 1800mm. The driving motor power is 0.75kw. Load on turntable ≤1-5T.
The main part of the machine, placed on the top of the chamber, can effectively achieve the automatic circulation of sand and automatic separation and dust removal.
The utility model is composed of a filter element, a pulse back blowing mechanism, a centrifugal fan, a dust collecting bucket and the like. Equipped with 1 set of 9 filter box. The box body is welded by 4mm cold-rolled steel plate and the inner and outer surfaces are painted.
Dimensions: 1200(L) x1200(W) x2300(h) mm. (note: excluding fan height)
Dust blower: 5.5 kw high pressure centrifugal blower
Door: pneumatic control, automatic door opening and closing
Electrical control system:
The electric system is composed of PLC, touch screen, travel switch, reversing switch, control box, motor, corresponding electric pipeline and control component.
Total Equipment Power: about 7.8 kw (excluding Air compressor power) power supply 380v50hz three-phase five-wire system;
Mobile Trolley Drive Motor: 0.75 kw one
Rotary Table Drive Motor: 0.75kw, one variable frequency speed governor
Lighting: 7X36W = 0.252kw
Dust blower: 5.5 kw, one set
Air Compression System (customer’s own)
The sand blasting pressure can be adjusted according to the technical requirements. The pressure ranges from 1 to 8 bar,
when the pressure is 0.6 mpa, the total air consumption is about 3 m3/min. Therefore, the air compressor needed for this equipment needs to be able to output more than 3 m3/min flow of drying Compressed air (need 22KW 30 hp air compressor)
First time to use this kind of machine
If any problem with machine after receiving
. Usually for Whole machine . Warranty is 1 year ( but not incleads wear parts like : blasting hose .blasting nozzles and gloves )
What kind of abrasive be used in your sandblast machine ?
.For suction type sandblast cabinet : Glass beads . garnet .Aluminum oxide etc non-metal abrasive 36-320mesh media could be used
.For Pressure type sandblast machine : can use any media which less than 2mm includes steel grit or steel shot media