-
Vibratory finishing machine with free noise cover
Vibratory finishing machine with free noise cover
Application& Advantage
Vibratory tumble finishing systems produce a cutting action by shaking the processing vessel (the finishing tub) at a high speed,
causing the tumbling media and parts to scrub against each other. This scrubbing action precisely abrades the parts to remove burrs.
A shaft with rotating eccentric weights mounted on the tub produces the shaking action.Vibratory deburring machines and finishing systems produce a cutting action that is very thorough.
They remove material from pockets and recesses and inside bores, which cannot be done in a barrel tumbler,
so they can be used for very delicate or intricate parts. With high speeds and a short stroke,
they can also run large bulky parts without damage. Large wing spans and landing struts are routinely run in these systems.
Vibratory finishing systems also lend themselves to be automated easily.
They can be fully automated for a flow-through operation or used as a basic batch operation.
The action is that of a small orbit at a high speed and thus is very powerful, yet causes little stress on the partsDifferent models & Techincal
Model Capacity Motor Power Motor speed PU Weight(kg) Size(L×W×H)mm (r/min) (mm) HST-300(BC) 300L 3.7kw 1450 20 400 1480×1350×1100 HST-400(BC) 400L 3.7kw 1450 20 600 1480×1350×1100 HST-600(BC) 600L 5.5-7.5KW 1450 20 1500 1950×1750×1450 More pictures
-
Holdwin Surface treatment vibratory finishing machinery tumbler bowl with cover no noise
Vibratory deburring machines and finishing systems produce a cutting action that is very thorough.
They remove material from pockets and recesses and inside bores, which cannot be done in a barrel tumbler,
so they can be used for very delicate or intricate parts. With high speeds and a short stroke,
they can also run large bulky parts without damage. Large wing spans and landing struts are routinely run in these systems.
Vibratory finishing systems also lend themselves to be automated easily.
They can be fully automated for a flow-through operation or used as a basic batch operation.
The action is that of a small orbit at a high speed and thus is very powerful, yet causes little stress on the parts -
Industrial centrifugal dryer •Hot air centrifugal dryer
- Hot air centrifugal dryer is used to ensure the parts stain-free and corrosion free dried,following wet massfinishing processing,
- which is very important for the parts to be painted as a final operation,most suitable for processing small parts.
- Drying by hot air and cavnum
- Inner centrifugal basket made of stainless steel with holes,water removed from the surfaces of the parts by centrifugal force which increases working efficiency.
- Heated air shortens the drying time and evaporates the moisture and protects parts from rust and corrosion.
- Inverter variable speed control for more process options.
- Protect device shuts off power automatically when processing finished or the cover opened.
-
HOLDWIN Industrial Centrifugal Dehydrator dryer Oil removing machine 70L
Industrial Centrifugal dewatereris used to ensure the parts stain-free and corrosion free dried,following wet massfinishing processing,which is very important for the parts to be painted as a final operation
most suitable for processing small parts.
- Drying by hot air and cavnum.Inner centrifugal basket made of stainless steel with holes,
- water removed from the surfaces of the parts by centrifugal force which increases working efficiency.
- Heated air shortens the drying time and evaporates the moisture and protects parts from rust and corrosion.
- Inverter variable speed control for more process options.
-
Automatic flow polisher
Application
The polisher can be widely used in various industries in the metals, non-metallic materials deburring parts of stamping parts
machining parts, casting and forging, h
eat treatment and other parts, chamfering, decaling, polishing and other processes.
Especially for complex shapes, burrs large oxide thick-skinned, and small parts provides the best processing equipment.
-
Automatic Rotary polishing machine with separator
1. Vortex polisher using the original vortex flow principle, the workpiece and the grinding stone to achieve fast enough friction, superior light efficiency, improve efficiency 15-30 times.
2. Vortex polisher turntable motor for the motor, may need to select the speed dial; timer with digital display, easy to operate, can always spot the workpiece situation.
3. Vortex polisher turntable fixed tank and lined with polyurethane rubber, and the gap between adjustable turntable, wear resistance and long service life.
-
Automatic Steel Nail Efficient Barral polishing deburring machine
Its capacity size can be divided into 150 liters, 300 liters and 600 liters of several specifications For stainless steel, iron, copper, zinc, aluminum,
magnesium alloy and other materials by stamping, casting, casting, forging, wire, ceramics, jade, coral, synthetic resins, plastics,
ceramics and other material items surface polishing, chamfering, remove burrs , rust, rough grinding, precision grinding, polishing gloss, go black film, black and fine grinding, polishing chamfering
-
Automatic Rotary polishing machine
Application
Suitable for small work piece high-precision grinding and polishing operations, can quickly remove the chamfer,
playing burr grinding and polishing, also suitable for the removal of silica gel flash.
-
Vibratory separator
Features:
1、Driven by horizontal motors
2、uick release fastening system permits fast screen change.
3、eplaceable screen can be made of stainless steel which is durable and rustproof or coated with PU to eliminate abrasion. -
ultrasonic vibro deburring machines polishing
KEY APPLICATION
The vibratory machine key application are processing parts made of metals, non-ferrous metals and non-metals. Besides,engineers use the process for burr and rust removal, metal parts edge rounding and mirror polishing. In addition,
this process is popular especially for polishing of parts with complicate surface geometry and concave surface.
After processing, there is no damage on parts surface and no affect on parts dimensions.Also, surface roughness of parts can improve 1-2 degree. Vibratory machine is suitable to finish small to medium size parts in a larger batch quantity.
KEY FEATURES
√ Shallow incline of processing channel.
√ Manually insert-able separation gate or pneumatically activated separation flap option.
√ Convenient operation and reduced labor costs
√ Adjustable imbalance weights allow different finishing intensities.
√ Wear-resistant lining made from high quality PU.
√ Media unload plug with integrated effluent drain. -
Stone Vibratory polishing machine
Long type Stone Vibratory finishing machine Application:Radiusing,Deburring,Derusting,Surface smoothing,Degreasing,Cleaning before plating or chemistry,Finishing,polishing. Technicalparameters: Model Capacity (L) Lining thickness (mm) Empty weight (kg) Motor (kW) Tub size (mm) L×W External dimensions (mm) L×W×H HST240 240 20 450 2×1.1 690×672 1880×880×920 HST500 500 22 1200 2×2.2 1310×672 2870×880×920 HST750 750 22 1600 2×5.0 2... -
Magnetic polishing machine for small metal parts
Magnetic polishing machine – deburring small parts for precision polishing effect is remarkable.
magnetic polishing machine principle: Magnetic polishing machine is a new device.
Use of super high frequency electromagnetic force changes, conduction small grinding media (stainless steel standings).
resulting in high-speed flow, turn around, shake and other movements.
over the workpiece bore.any uneven surface friction a reach polishing .cleaning.removal of precision grinding burrs and other effects
