These media formulations provide many benefits. The higher density produces more ‘pressure’ in the tumbler resulting resulting in shorter cycle times and higher part throughput. The longer lifetime (up to 4 times longer than standard Ceramic Media) allows for fewer media purchases and reduced cost. The toughness and fracture resistance nearly eliminates the risks of media chips lodging in part. The shorter cycle times result in less water and compound usage further reducing operating costs and effluent generation.
The High Density Ceramic Media are available in three different grades for polishing, light deburring with very low residue and general purpose deburring with short cycle times. The KHD7 Bond is an impervious, long lasting polishing media producing a high polish. The KHD8 Bond is a very low residue, light deburring media. The KHD9 Bond is a general purpose deburring media with short cycle times and lower residue than the standard KM Bond Ceramic Media. All three bonds result in a bright surface finish.
High Density Ceramic Media provides the following advantages:
Porcelain medias are made of alumina, extremely hard, which is mainly used for fine finishng, polishing, lursting and burnishing of mrtal parts, can be available in white, yellow or green color. Available shapes including Ball, Triangle, angle-cut triangle, Cylinder, angle-cut triangle, Ellipse, angle-cut, ellipse.
Ball: 1.0, 2mm, 3mm, 4mm, 6mm, 8mm, 10mm
Triangle, angle-cut triangle: 3×3, 3×8, 4×4, 4×10, 6×6, 6×12, 8×8, 10×10
Cylinder, angle-cut cylinder: 1×3, 2×8, 3×5, 3×6, 3×8, 3×10, 4×8, 4×10,4.5×8, 5×8, 5×15, 6×15, 8×16, 10×15, 10×16, 10×20.
Ellipse, angle-cut ellipse—10x6x10, 12x7x15, 15x7x15mm
1) Are you Manufacture or Trading company ?
We are a professional manufacture more than 10 years . we have two Factories in Hangzhou and Changzhou
Usually for Whole machine . Warranty is 1 year ( but not incleads wear parts like : blasting hose .blasting nozzles and gloves )
3) What kind of abrasive be used in your sandblast machine ?
For suction type sandblast cabinet : Glass beads . garnet .Aluminum oxide etc non-metal abrasive 36-320mesh media could be used
For Pressure type sandblast machine : can use any media which less than 2mm includes steel grit or steel shot media